Sikacryl®-110

USES
Sikacryl®-110 is designed for interior crack and joint
filling with low movement. Sikacryl®-110 is also suitable for duct sealing in HVAC applications.
Main applications:
▪ Head of wall joints
▪ Wall joints
▪ Interior joints around windows and doors
▪ Around the penetrations
▪ As a gap filling in the construction joints

FEATURES
▪ Good application properties
▪ Movement cabability of ±7.5 % (ASTM C719)
▪ Mildew and fungus resistant
▪ Over-paintable
▪ Good adhesion on various substrates
▪ For interior use
SUSTAINABILITY
Certified according “Low Emitting Materials as per Al
Sa’fat – Dubai Green Building Evaluation System” by
Dubai Central Laboratory (DCL)
▪
CERTIFICATES AND TEST REPORTS
▪ Tested acc. ASTM C920
▪ Tested acc. ASTM C794
▪ Tested acc. ASTM C834
▪ VOC test report (USEPA method 24)
▪ VOC Emission Test report (CDPH)
▪ Tested acc. ASTM E90 – Airborne Sound Transmission

PRODUCT INFORMATION
Composition 1-Component acrylic dispersion
Packaging 280 ml cartridge, 12 cartridges per box
Colour White and grey
Shelf life Sikacryl®-110 has a shelf life of 12 months from the date of production, if it
is stored properly in undamaged, original, sealed packaging, and if the
storage conditions are met.
Storage conditions Sikacryl®-110 shall be stored in dry conditions, protected from direct sunlightand frost, at temperatures between +5 °C and +25 °C.

TECHNICAL INFORMATION
Shore A hardness ~28 (21 days) (ASTM C661)
Tensile strength ~1.2 N/mm2 (ASTM D412)
Movement capability ±7.5 % (only for cracks and low-movement joints) (ASTM C719)
Service temperature −20 °C min. / +70 °C max. (dry)
Joint design The joint width must be designed to suit the joint movement required and
the movement capability of the sealant. The joint width shall be ≥ 10 mm
and ≤ 15 mm. A width to depth ratio of 2:1 must be maintained (for exceptions see table below).
Min. joint width [mm] Min. joint depth [mm]
5 5
8 6
10 6
15 8
20 10
25 12

APPLICATION INFORMATION
Consumption Length of joint [m] = 280 ml / (Joint width [mm] x Joint depth [mm])
Joint length [m] per
280 ml
Joint width [mm] Joint depth [mm]
11 5 5
5.8 8 6
4.6 10 6
2.3 15 8
1.4 20 10
0.9 25 12
Triangular joints (where the sides of the joint meet at a right angle) shall
have sides ≥7 mm.
Sag flow Non sag (ASTM C639 )
Ambient air temperature +5 °C min. / +45 °C max., min. 3 °C above dew point temperature
Substrate temperature +5 °C min. / +45 °C max.
Curing rate ~4 mm/24 hours (23 °C / 50 % r.h.) (CQP 049-2)
Skinning time ~10 min (CQP 019-1)
Tack free time ~35 min